You have 18 item(s) in your cart
Subtotal:
$ 806.25
$ 88.00
Monitor multiple batteries, as well as the cranking system and charging system of a vehicle. The MA98415 can be used to monitor up to 4 stand-alone 12V batteries, or the combined pack voltage, up to a 48V system. After being connected to the battery, connect the monitor to a mobile device (phone or tablet) via a mobile App. The App will then alert the user to the voltage of the batteries and fault conditions when the mobile device is within Bluetooth 4.0 range (about 10 metres). It will also record the duration of any engine run time to be able to monitor trip duration.
Product Specifications
Average Current 1.5mA
Input Voltage 6-20V
Operating Temperature -40C° to 90C°
Product Dimensions 5.5 x 3.7 x 1.6cm
Voltage Accuracy +/-0.03V
Short-circuit Protection -Yes
Reverse Polarity Protection – Yes
Bluetooth Version 4
Bluetooth Name Matson Monitor
App Name Matson Monitor
Installation
Note: Be very careful not to fully disconnect car battery leads from battery during installation; you may lose vehicle memory settings!
1) Firmly attach the Red connector to the Positive (+) battery terminal and the Black connector to the Negative (-) battery terminal.
2) Using the double sided Velcro provided, attach the product to the vehicle battery. Clean the surface that the unit will be attached to first. It is recommended to attach the unit to the top of the battery to minimize interference with the communication signal.
3) When connecting to a battery pack (24/36/48V) a monitor must be attached to each individual battery
App Interface
App Interface – Voltage History Graph
App Interface – System Setup
App Interface – Cranking Test
App Interface – Charging Test
Select the Charging Test screen.
MAKE SURE THE VEHICLE IS IN NEUTRAL GEAR !
With the engine running, follow on screen instructions:
App Interface – Trip Record
App Interface – Monthly Activity Report
Operation Tips
1) Product should not be exposed to higher than 20V or it will be damaged.
2) App requires smart devices. Earliest compatible versions are Android 4.3 and iPhone 4S.
3) Mobile device will only receive notifications within Bluetooth range. (10M)
4) During initial setup, if the user does not allow the mobile device to access location data, the mobile device will not receive notifications. This can be fixed by entering the mobile device settings menu and allowing access to location data for the app.
5) If the “daily test alert” or “daily exception alert” functions are not enabled in the app, the mobile device will not receive these notifications. They can be enabled in the app at any time.
6) Firmware updates will clear all data in the device if not allowed to sync to the app first. To avoid this, make sure the mobile device is in range of the battery monitor and allow the sync to complete before starting the firmware update.
7) If the app is upgraded or updated, all historic data will be retained. If the app is deleted from the mobile device, all historic data will be lost.
8) The battery monitor device can monitor and store up to 31 days of data without syncing to the mobile device. If the Mobile device does not come within range of the battery monitor for more than 31 days, the old data will be discarded to make space for new data.
9) On setup, when the mobile device is searching for the Bluetooth battery monitor, make sure the mobile device has Bluetooth switched on, and is close to the battery monitor (within 10m) without any obstructions.
Installation
Note: Be very careful not to fully disconnect vehicle battery leads from battery during installation You may lose vehicle memory settings!
Hi guys, SPECTACULAR service again….Thank You !! I work in a Mitre 10 store here in SA, and I wish we could get goods even from Adelaide as quick as that. WELL DONE!
If there was an Olympics for fast efficient service, Team Munich would take the Gold every time