Quick Find


Use keywords to find the product you are looking for (includes BMW part numbers)
Advanced Search
 Find a BMW Part Number

BATTERY CHARGER (Can-Bus Compatible)
[00004312VLT]

 $147.00 

BC K900 EVO+ is the only battery charger compatible with CAN-BUS for lead-acid and lithium batteries: in fact, "Lead-Acid CAN-Bus" and "Lithium CAN-Bus" programs allow to charge the battery directly from the DIN 4165 socket installed on BMW motorcycles with any kind of 12V battery.
 
Not only is BC K900 EVO+ ideal for recovery, charging and maintenance of all motorcycle, scooter and ATV batteries, but it can be also used for the maintenance of car batteries, and it is designed to be always connected to the battery, without any risks or needs to disconnect the battery from the vehicle, even for months, when bikes or cars are not used.
 
Selecting the program is extremely easy, and the operating mode appears on the LED bar and it is kept in memory for the next use.
The internal microprocessor automatically executes a multi-cycle charging algorithm (8 cycles for lead-acid batteries, 7 cycles for lithium batteries). The algorithm for lead-acid batteries allows to recover deeply discharged batteries (from 1.25V) and to charge, desulfate and maintain all 12V batteries (wet, gel, sealed…) from 1.2 to 100 Ah.
 
The Lithium/LiFePO4 charging program executes a fast and efficient charge, balancing the charge of each cell and allowing a perfect maintenance for long periods. Safety is guaranteed in each step: in case of low temperatures, detected by the integrated sensor, the POLAR Mode turns on.
BC K900 EVO+ supplies a maximum current of 1 Amp. Two LEDs indicate the charging cycle and any operating anomalies. 
 
The device does not produce sparks and it is protected against short circuit, polarity inversion, overcharge and overheating. 
The package includes a waterproof cable with eyelets, to be left always installed onboard of the vehicle, a cable with insulated clamps and a 12/18 mm universal adapter for 12V sockets,compatible with DIN BMW standard. 
Warranty 3 years.
 
**CHARGING PROGRAM SELECTION**
Once you connected the battery charger to the power outlet, a LED bar will show you the active charging mode. To change the charging mode, please follow this procedure:
 
With the device disconnected from the battery and from the power outlet, connect the clamps to the device and put the red and the black clamps together (creating a permanent short circuit).
Connect the device to the power outlet. The active charging mode will change and it will be displayed by the correspondent LEDs: "Lead-Acid" for lead-acid batteries, "Lithium/LiFePO4" for lithium batteries, and the "CAN-Bus" LED on when the modes "Lead-Acid CAN-Bus" or "Lithium CAN-Bus" are activated.
Disconnect the device from the power outlet and separate the clamps. The selected charging mode will be kept in memory until you repeat this procedure
 
TECHNICAL DATA BC K900 EVO+
Input Voltage 220÷240 Vac, 50÷60 Hz
Charging Voltage 13.8 V / 14.4 V - nominal 12 V
Charging Current 1 A max
Battery type 12 V Lead Acid (sealed, gel, MF, VRLA, AGM, EFB, Ca/Ca, etc.) & 12V Lithium / LiFePO4
Charging Algorithm - Lead/Acid 8 cycles, automatic
(Inizialization, Recovery, Soft Charge,
Bulk Charge, Desulfation, Battery Analysis,
Maintenance and Equalization)
Battery Capacity - Lead/Acid From 1.2 Ah to 100 Ah (Maintenance)
Charging Algorithm - LiFePO4 7 cycles, automatic (Inizialization, Recovery,
Soft Charge, Bulk Charge, Equalization,
Battery Analysis and Maintenance)
Battery Capacity - LiFePO4 From 1 Ah to 100 Ah
Operating temperature from -20° to +50°C
IP Class
IP44 - Weatherproof - Protection againstwater splash, suitable for outdoor use
 
**LEAD/ACID BATTERIES - 8 CYCLE CHARGING TECHNOLOGY**
BC K900 EVO+ is a battery charger and charge maintainer with digital technology: it is run by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and of executing a new charging algorithm with 8 pulsing cycles:
1. Initialization: the device checks if one or more cells are shorted, in order to verify that the battery is in a proper condition to be recharged/recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.25 V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge, the device provides a light pulsing current to the battery, to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Desulfation / Absorption: the device provides a "controlled overcharge" to recover the remaining 10-15% of the battery capacity, through the desulfation/recovery of the lead-acid cells (for low or medium sulfation).
6. Battery Analysis: the device stops providing current to the battery for a short time, in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: the device keeps the battery in the best charge conditions for very long periods (even months) during which your vehicle is left unused, without any possible drawback (battery overcharge, battery overheating, water and/or electrolyte loss, etc).
8. Equalization: every 30 days during long term maintenance, the device executes an equalization charge in order to balance the battery lead-acid cells, avoiding electrolyte stratification within the cells.
 
**LITHIUM/LiFePO4 BATTERIES - 7 CYCLE CHARGING TECHNOLOGY**
BC K900 EVO+ is a battery charger and charge maintainer with digital technology: it is run by a latest-generation microprocessor, which is in charge of monitoring the battery parameters in real time and of executing a new charging algorithm with 7 pulsing cycles:
1. Initialization: the device checks if one or more cells are shorted, in order to verify that the battery is in a proper condition to be recharged/recovered.
2. Recovery: if the battery is deep discharged (battery voltage starting from 1.25 V), the device tries to recover it, taking it back to a higher voltage.
3. Soft Charge: if the battery is in a condition of significant undercharge, the device provides a light pulsing current to the battery, to overcome this critical phase.
4. Bulk Charge: the device provides full current to the battery, recovering about 85-90% of the battery capacity.
5. Equalization: in this phase the remaining 10-15% of the battery capacity is recovered and the level of charge of the battery cells is rebalanced.
6.Battery Analysis: the device stops providing current to the battery for a short time, in order to verify whether the battery is able to retain the charge received. This test is periodically repeated during the Maintenance.
7. Maintenance: thanks to an electronic circuit especially designed, the battery charger executes a pulsing maintenance of the charge when the battery is not used, in a very safe way, without any risk of overheating or overcharge.
SAFETY AND PROTECTIONS
BC K900 EVO+ features a series of 8 protections and active guard mechanisms that make it easy to install and to use, without any risks even for users without expertise:
- No interferences the vehicle's on board electronics (control unit, ABS, GPS...)
- Protection from output lines short circuit, even for an indefinite time: no sparks!
- Protection from battery polarity inversion
- Protection from battery overcharge/overheating
- Thermal protection from overtemperature
- No need to disconnect the battery from your vehicle
- Very few gas development during the charge: no need to remove the battery plugs
Laboratory Tests ensure the manufacturing of products in conformity to the regulations in force on safety and electro-magnetic compatibility. Norms and Regulations: IEC-61000-3-2(ed.3);am1;am2, IEC-61000-3-3(ed.2) CEI-CISPR14-1(ed.5);am1;am2, CEI-CISPR14-2(ed.1);am1;am2, IEC60335-1(ed.5), IEC-60335-2-29(ed.4);am1;am2.
 
BATTERY TYPES AND CAPACITY
BC K900 EVO+ is specifically designed for charging and maintaining all 12V lead-acid batteries (traditional Lead Acid, VRLA, MF, AGM, EFB, GEL, Ca/Ca, etc) and 12V Lithium/LiFePO4 batteries. 
 
BC K900 EVO+ is addressed to recharge lead/acid batteries with a capacity from 1.2 to 100 Ah and LiFePO4 batteries from 1 to 100 Ah.
 
ACCESSORIES
The package includes:
- the battery charger and maintainer BC K900 EVO+ for long term battery maintenance, provided with a power cable (2 meters long) and a battery output cable;
- waterproof battery cable with eyelets, which can be left always installed on board;
- battery cable with clamps;
- universal cigar socket adapter 18 mm / 12 mm also compatible with BMW DIN 4165 socket;
- copy of the User Manual.

extra Images
BATTERY CHARGER (Can-Bus Compatible)
Click to enlarge
BATTERY CHARGER (Can-Bus Compatible)
Click to enlarge
BATTERY CHARGER (Can-Bus Compatible)
Click to enlarge
BATTERY CHARGER (Can-Bus Compatible)
Click to enlarge
Quantity:
Customers who bought this product also purchased
FAT FOOT (SIDESTAND ENLARGER)
FAT FOOT (SIDESTAND ENLARGER)
MAJOR SERVICE KIT
MAJOR SERVICE KIT
AIR COMPRESSOR INLINE TYRE GAUGE
AIR COMPRESSOR INLINE TYRE GAUGE
OIL FILTER REMOVAL TOOL
OIL FILTER REMOVAL TOOL
SUMP PLUG MAGNETIC (Polished Stainless Steel)
SUMP PLUG MAGNETIC (Polished Stainless Steel)
GEAR LEVER MECHANISM FOAM WASHER
GEAR LEVER MECHANISM FOAM WASHER
 Shopping Cart more
0 items
 Customer Service
Delivery Information
Returns & Refunds
Wholesale Customers
 Secure SSL Checkout


>> Click Here for More
 Testimonials more

Just want let you guys know how impressed I am with the service you provide. You have set the standa...

Read More


Rudy     
 Find Us On Facebook

 Photo Gallery

>> Click Here for More
The Web Shop